Blog
Blog
Blog
Tired of Eyestrain & Blurry Solder Joints? Repairman's Eyepiece: The Go-To for Techs Who Wear Glasses
As an electronics repair tech, do you:
Wince when pressing your glasses against microscope eyepieces (leaving red marks on your nose)?
Struggle to spot 0.1mm solder defects because your current eyepiece’s magnification is too low (or too high)?
Wast
Created on 12.09
Tired of Sore Eyes & Dusty Eyepieces from Staring at Microscopes? MOS-038 Dustproof Eye Mask: Comfort + Dust Protection in One Twist
Spend 3-4 hours daily staring at microscopes for PCB repairs or component inspections—only to end up with dry, sore eyes, and eyepieces so dusty you spend more time wiping them than working? Generic eye masks either dig into your face or fail to b
Created on 12.04
Your Microscope Camera: Boring, Blurry, and Annoying? Try the MOS-4K C Multicolor 4K Industrial Camera
🚨 Is Your Microscope Camera Like This?
All your tools are black boxes—wasting 10 mins every time you grab the wrong one?
Blurry footage lets 0.1mm burrs slip through… costing you batch scrap fees?
Your team crowds around the eyepiece, cutting work
Created on 12.03
LS6 Polarized Annular Light Source by JinHongTong Tech: Stop Glare Ruining Your Microscope Inspections
😤 Your Old Microscope Ring Light Is Holding You Back
Are you:
Squinting at PCB solder joints because metal parts glare so bad you can’t tell good from bad?
Missing 0.1mm burrs (and risking batch scrap) because your light is too dim or scattered
Created on 12.02
Mic3-B11 Trinocular Stereo Microscope by JinHongTong Tech: Stop Missing 3D Micro Details—Your Workflow’s New Game-Changer
🛠️ Your Daily 3D Observation Headaches, Solved
Are you:
Reworking PCB solder joints again because you can’t see the 3D layout of tiny pins?
Letting 0.1mm burrs slip through QC (and risking batch scrap) with flat, blurry tools?
Crowding 3+ team m
Created on 12.01
MOS760-B11 Trinocular Stereo Microscope by JinHongTong Tech: Stop Missing 3D Micro Details—Your Lab/Workshop’s Versatile Workhorse
🚨 Your 3D Observation Headaches, Solved
Are you:
Reworking PCB solder joints again
Letting 0.1mm burrs slip through QC (and risking batch scrap) with flat, blurry microscopes?
Crowding 3+ team members around one eyepiece just to view a tiny sampl
Created on 11.29